Mahr Federal Pocket Surf the portable surface roughness gage
*Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. *Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging. *Can be used to measure any one of four, switch-selectable,, parameters: Ra, Rmax, Ry, Rz. *Selectable traverse length 1, 3 or 5 cut-offs of 0.8mm/.030". *Operates in any position - horizontal, vertical and upside down. *Four switchable probe positions - axial (folded) or at 90, 180 or 270 degrees. *Even difficult to reach surfaces such as inside and outside diameters are accessible. *Integrated data output for SPC-processing units that is compatible with the most common data processing systems. *easy to read LCD readout presents the measured roughness value, in microinches or micrometers, within half a second after the surface is traversed. *Out of range (high or low) and "battery low" signals are also displayed.
| ||